Operation Manual

<7. Operation of EJXMVTool>
7-2
IM 01C25R51-01E
7.1.2 Primary Device and Pipe Setup
Figure 7.2 Primary Device and Pipe Setup Screen
(1) Primary Device Type
The device types are Selectable from the followings:
Type
Orice
Nozzle
Venturi
Fix
(2) Primary Device Description
The primary device selectable from followings.
Table 7.1 Primary Device
Type Primary Device
Orice O
riceCornerTaps[ISO5167-11991]
OriceCornerTaps[ISO5167-22003]
OriceCornerTaps[ASMEMFC-3M1989]
O
riceFlangeTaps[ISO5167-11991]
OriceFlangeTaps[ISO5167-22003]
OriceFlangeTaps[ASMEMFC-3M1989]
OriceFlangeTaps[AGANo.31992]
OriceDandD/2Taps[ISO5167-11991]
OriceDandD/2Taps[ISO5167-22003]
OriceDandD/2Taps[ASMEMFC-3M1989]
Nozzle I
SA1932nozzle[ISO5167-11991/ISO5167-32003]
Longradiusnozzle[ISO5167-11991/ISO5167-32003]
ASMEFLOWNOZZLES[ASMEMFC-3M1989]
Venturi V
enturinozzle[ISO5167-11991/ISO5167-32003]
ClassicalVenturitube“ascast”convergentsection[ISO5167-11991/ISO5167-42003]
ASMEVenturiTubesWitharoughCastorFabricatedConvergent[ASMEMFC-3M1989]
ClassicalVenturitubewithamachinedconvergentsection[ISO5167-11991/ISO5167-42003]
ASMEVenturiTubesWithamachinedconvergentsection[ASMEMFC-3M1989]
ClassicalVenturitubewitharough-weldedsheet-ironconvergentsection
[ISO5167-11991/ISO5167-42003]
FIX Fixed Mode
*1
*1:Setsthedischargecoefcientandgasexpansionfactortoaxedvalue