Operation Manual

<6. Operation of FlowNavigator Program>
6-17
IM 01C25R51-01E
6.3.2 Import
(1) ImportFlowConguration.XMVle.
 “UserFlowParameters”and“DeviceFlowParameters”forEJXMultivariableTransmitter
can be imported.
(
2) ImportFlowConguration*.VMVle
 “UserFlowParameters”and“DeviceFlowParameters”fordigitalYEWFLOVortex
Flowmeter can be imported.
NOTE
Referto‘9.1CongurationFile’forinformationofleformatofFlowCongurationle.
ImportcanbeusedintheFlowCongurationModescreen.
NOTE
TheXMVlemadeontheFSA210iscompatiblewithFSA120.
Figure 6.16a Importing a File
NOTE
FlowCongurationWizardR1.02.01orlaterdoesnotallowsettingthegaugepressuretothe
Referencepressure.Ifimporting.XMVleinwhichtheReferencepressureisconguredasthe
gauge pressure using R1.02.00 or earlier, the following message is displayed.
Figure 6.16b Information Message for Reference Pressure
Reenter the absolute pressure equivalent to the displayed gauge pressure for the Reference
Condition in Fluid Operating Range Setup screen.