Operation Manual

<5. Operational Flowchart>
5-9
IM 01C25R51-01E
(C) Conguration with existing conguration File (VMV le)
Step FieldMate Menu
DYF(SoftDL) F
OUNDATION fieldbus DTM
Layer1 Layer2 Layer3
DYFMVTool
Main Window
Procedure
"Online Parameter" is opened.
Upload "Device Flow Parameters"
and "Device General Parameters".
Edit "Device General Parameters"
and Apply "Offline Database". 3)
"Import VMV Menu"
Import "User Flow Parameters"
and "Device Flow Parameters"
from existing file (*.vmv file).
Confirm / Modify compensation
mode and "Device Flow
Parameters".
Confirm / Modify "User Flow
Parameters".
Confirm / Modify "User Flow
Parameters".
Confirm / Modify "User Flow
Parameters" and "Device Flow
Parameters".
"Export -> Export VMV Menu"
Export "User Flow Parameters"
and "Device Flow Parameters" to
binary file.
Download
"Device Flow Parameters" and
"Device General Parameters".
Confirm the compensation
calculation by input simulation for
flow rate temperature and pressure.
"Report Menu"
Export "User Flow Parameters" in
CSV file format.
Apply "Device Flow Parameters"
to "Offline Database".
Goes offline.
1
Start DTM and
upload
parameter
from the
device
Import
existing
file and
confirm /
modify flow
configuration
Download
parameter to
the device
Confirm flow
configuration
2
3
4
Device
Device
Parameter
Offline
Parameter
Flow
Configuration
Wizard
Flow
Configuration
Mode
Fluid Type
Setup
Fluid
Operating
Range Setup
Fluid Physical
Property
Setup
Apply Flow
Configuration
Assigned DTM
Device
Download to
device 2)
Upload from
device 1)
Parameter
Additional
Functions
Online
Parameter
Disconnect
Device
F0507E.ai
1) Beforestartingoperation,execute‘Uploadfromdevice’,sothat“DeviceGeneralParameters”oftheowmeterin
theofinedatabasearesynchronizedwiththedevice.Uploaddatafromthedevicedoesnotinclude“UserFlow
Parameters”.
 *:“UserFlowParameters”consistofuidinformationandoperatingcondition.
2) Executing‘Downloadtodevice’willwriteboth“DeviceFlowParameters”and“DeviceGeneralParameters”into
thedevice.Beforeexecuting‘Downloadtodevice’,execute‘Uploadfromdevice’,soastomake“DeviceGeneral
Parameters”ofthedeviceintheofinedatabasesynchronizedwiththedevice.
 Downloaddatatothedevicedoesnotinclude“UserFlowParameters”.
3) TemperatureunitandpressureunitinARBlockarenotconguredinFlowCongurationWizardDetailCompensation
Mode.
 TheseparametersmustbesetmanuallyinARBlockofineparameter.