Operation Manual

<4. Preparation>
4-25
IM 01C25R51-01E
4.6 Start FDT Frame Application
This section describes the operation of DTM with using FieldMate.
For the detailed operation of FieldMate, refer to User's manual of FieldMate.
The procedure is described with EJX910 HART DTM as an example.
4.6.1 Update DTM Setup
AfternewDTMisinstalled,click“DTMSetup”,soastoconrmthatthedesignatedDTMis
correctly installed.
C
lick[Start]→[AllPrograms]→[YOKOGAWAFieldMate]→[Tools]→[DTMSetup]
4.6.2 Start FieldMate
Starting FieldMate by following operation.
Step 1 Click [Start] → [All Programs] → [YOKOGAWA FieldMate] → [FieldMate]
Figure 4.31a Start FieldMate