Operation Manual

<4. Preparation>
4-23
IM 01C25R51-01E
4.5 Initial Setting (FOUNDATION eldbus
Communication)
NOTE
Regarding start up procedure of the device, refer to following:
E
JXMultivariableTransmitter:User’sManualIM01C25R01-01E“EJX910AandEJX930A
Multivariable Transmitters”
d
igitalYEWFLOVortexFlowmeter:AppendixB-1
4.5.1 Device
AddressandTags(PDTagandVFDTag)mustbesetinthedevice.
IMPORTANT
UsefunctionblockschedulingandconnectiontoolforDYFMVTool.Afterusingthesesettingtool,
nishtheprogrambeforestartingFlowNavigator.
4.5.2 Install Communication Device
Install the Communication Device on PC.
4.5.3 Communication Setting
Refer to Appendix D-2 for Communication Device Setting.
4.5.4 Connect the Device to the power supply
(1) For EJX Multivariable Transmitter
RefertoUser’smanualIM01C25R03-01E“EJX910AandEJX930AFieldbus
Communication Type.”
(
2) For digitalYEWFLO Vortex Flowmeter
RefertoUser’smanualIM01F06F00-01E“ModelDYVortexFlowmeter,ModelDYAVortex
Flow Converter, Fieldbus Communication Type”
4.5.5 Connect the Device to the Segment