Operation Manual

<4. Preparation>
4-22
IM 01C25R51-01E
Figure 4.27 HART Modem conguration
F0428E.ai
Select COM port number.
Figure 4.28 COM port
Please refer to FieldMate User's manual for details.
(2) Communication address setting on FieldMate
InFieldMate,thedefaultsettingofmaximumscanvalueofcommunicationaddressis“0”.
Ifthetransmitter’saddressisotherthan“0”,FieldMatecannotdistinguishthetransmitter.
Therefore, the setting should be changed to the correct value.
1
.Clickthe[Tool]→[HARTModemConguration..]atFieldMatewindow.
2. Select address number.
3
.Clickthe[OK]button.
F0429E.ai
Maximum value of communication
Address for scaning
Figure 4.29 Address Setting
Please refer to FieldMate for detail.