Operation Manual

<4. Preparation>
4-4
IM 01C25R51-01E
4.2.4 FieldMate and Device Files Installation
Install following software before installing FlowNavigator.
Step 1 Install software for communication device (For F
OUNDATION
fieldbus
communication)
Refer to Appendix D-1 for detail.
Step 2 Install FieldMate
NOTE
Device Files which includes Yokogawa DTMLibrary HART/FOUNDATIONeldbusandsoftwarefor
HART communication device are automatically installed during the installation of FieldMate.
Regarding installation of software for HART communication device, refer to Appendix C-1.
NOTE
For the installation procedures of FieldMate, refer to the User’s Manual IM01R01A04-01E
“FieldMateVersatileDeviceManagementWizardGettingStarted”.
When installing FieldMate, log-in the Windows as an Administrator or an user with an
administrative authority.
4.2.5 FlowNavigator Installation
Following gives the overview of FlowNavigator Setup and recommended installation procedures.
Overview of FlowNavigator Setup
The FlowNavigator setup is used for installing FlowNavigator (F
OUNDATIONeldbusProgram,
HARTProgramandResource)andlocatedin“FlowNavigatorCD-ROM”.
Followingshows“FlowNavigatorSetupwindow”.
F0401E.ai
Install FlowNavigator for both HART and
FOUNDATION fieldbus
[FlowNavigator]
Install FlowNavigator for HART
[FlowNavigator HART]
Install FlowNavigator for FOUNDATION
fieldbus
[FlowNavigator F
OUNDATION fieldbus]
Figure 4.1 FlowNavigator Setup window