Operation Manual

<3. Functional Specication>
3-6
IM 01C25R51-01E
3.4.3 Flow Parameter Management (Obtain Flow Coefcient)
ThisfunctionissupportedbyEJXMVTool.
 Flowcoefcientretrieval
 Theowcoefcientcanbeobtainedfromthedevice(inputselection:sensordataor
simulated data).
3.4.4 Primary Device
ThisfunctionissupportedbyEJXMVToolAutoCompensationMode.
Table 3.1 Supported primary devices
Type Primary Device
Orice O
riceCornerTaps[ISO5167-11991]
OriceCornerTaps[ISO5167-22003]
OriceCornerTaps[ASMEMFC-3M1989]
OriceFlangeTaps[ISO5167-11991]
OriceFlangeTaps[ISO5167-22003]
OriceFlangeTaps[ASMEMFC-3M1989]
OriceFlangeTaps[AGANo.31992]
OriceDandD/2Taps[ISO5167-11991]
OriceDandD/2Taps[ISO5167-22003]
OriceDandD/2Taps[ASMEMFC-3M1989]
Nozzle I
SA1932nozzle[ISO5167-11991/ISO5167-32003]
Longradiusnozzle[ISO5167-11991/ISO5167-32003]
ASMEFLOWNOZZLES[ASMEMFC-3M1989]
Venturi V
enturinozzle[ISO5167-11991/ISO5167-32003]
ClassicalVenturitube“ascast”convergentsection[ISO5167-11991/ISO5167-42003]
ASMEVenturiTubesWitharoughCastorFabricatedConvergent[ASMEMFC-3M1989]
ClassicalVenturitubewithamachinedconvergentsection[ISO5167-11991/ISO5167-42003]
ASMEVenturiTubesWithamachinedconvergentsection[ASMEMFC-3M1989]
ClassicalVenturitubewitharough-weldedsheet-ironconvergentsection
[ISO5167-11991/ISO5167-42003]
FIX F
ixedMode(Setsthedischargecoefcientandgasexpansionfactortoaxedvalue)