Operation Manual

<3. Functional Specication>
3-4
IM 01C25R51-01E
3.4 Function Detail
3.4.1 Device Management
Device Management function is supported by EJX910 HART/FOUNDATIONeldbusand
DYF(SoftDL) F
OUNDATIONeldbusDTM.
F
OUNDATIONeldbusDeviceDTMsupportsfollowingblocks.
EJX910 F
OUNDATIONeldbusDTM:
Resource block, Sensor Transducer block, Flow Transducer block, LCD Transducer block,
and AI function blocks
DYF(SoftDL) F
OUNDATIONeldbusDTM:
Resource block, Transducer block, AI function blocks and AR function block
ParametersofotherfunctionblocksshouldbesetandchangedbyotherFieldbuscongurators.
IMPORTANT
UsefunctionblockschedulingandconnectiontoolforDYFMVTool.Afterusingthesesettingtool,
nishtheprogrambeforestartingFlowNavigator.
(1) Online Parameter
The Device General Parameters of the device can be edited directly in online status.
(Tag, Range, Unit, Damping, Lowcut, Indicator display)
(
2) OfineParameter
TheDeviceGeneralParametersofthedevicecanbeeditedandstoredinofinedatabase.
(Process value monitoring, Tag, Range, Unit, Damping, Lowcut, Indicator display)
(
3) Downloads to or uploads from the device
TheDeviceFlowParametersandDeviceGeneralParametersstoredinofinedatabaseare
downloaded to the device.
T
heparametersofthedeviceisuploadedfromthedeviceandstoredinofinedatabase.
Device General Parameters:
HART or F
OUNDATIONeldbusparametersofthedevice,whichcanbemodiedwithusing
Device DTM. e.g. range, damping, etc.
User Flow Parameters:
T
heparameterswhichusersinputonEJXMVToolandDYFMVToolforowconguration.
These parameters are used to only generate Device Flow Parameters and not downloaded to
the device.
Device Flow Parameters:
T
heparameterswhichEJXMVToolandDYFMVToolcalculateandgeneratewithusingtheUser
Flow Parameters and are downloaded to the device.