Operation Manual

<Appendix D. FOUNDATION eldbus Communication Device Information>
D-2
IM 01C25R51-01E
(2) Select the port
Onthescreenshownup,select“Port0"andpress“Edit”.
Figure D2.2 NI-FBUS Interface Cong Screen
(3) Setting
After that, on the screen shown up, select the items indicated as below.
Figure D2.3 NI-FBUS H1 Port Properties
DeviceAddress: Select[Visitor]
DeviceType: Select[LinkMasterDevice]
Usage: Select[NI-FBUS]
CAUTION
When connect the NI-FBUS card to the Fieldbus segment when other Link Master may exist, be
sure to set the above beforehand.
If not, setting may cause disturbance of control.