Operation Manual

<Appendix B. Device Information>
B-4
IM 01C25R51-01E
Step 3 Upload function block scheduling and connection information
Follow the procedures below to load the function block scheduling and connection information
f
romthesegmentwherethedeviceexists.Thesettinginformationappearsonthe"Function
BlockApplication"screenafterloading.
<Menu:[Congure]→[UploadConguration]>
Figure B2.3 Before “Upload Conguration”
CAUTION
"UploadConguration"mustbeexecutedbeforesettingthefunctionblockschedulingand
connection information.
Without up-loading, the setting information in the device is overwritten.
NOTE
Whenanyblockhasschedulinginformationsetatshipment,itappearsonthe“FunctionBlock
Application” screen. Refer to Table B2.1, B2.2.
Figure B2.4 After “Upload Conguration”