Operation Manual

<10. Error Message>
10-1
IM 01C25R51-01E
10. Error Message
Errormessageisshowninbothpopupmessageanderrorlogle
(EJXMVTool.log/DYFMVTool.log).
Figure 10.1 Error message example
IncaseofPhysicalPropertyerror,codeandsubcodeisshowninerrorlogle
(EJXMVTool.log/DYFMVTool.log).
10.1 Error Message
Table 10.1 Error message
Code Sub code Information Message Explanation Recovery
600 8
[Display]
T
herangethatspeciedinthestepof
Fluid Operating Range Setup is too
narrow. Expand the range of Pressure
or Temperature.
[
Logle]
PhysicalCalclibError-ERR_RANK
Rankdecient
The temperature or pressure
range which was set by the
user at the Fluid Operating
Range Setup is too narrow. Try
another range value.