Operation Manual

<8. Operation of DYFMVTool>
8-23
IM 01C25R51-01E
Table 8.12 Input conditions in Connected Device’s AI Block
Input Device
Function
Block
Parameter
Value Unit
V
olumetricFlow
Rate
digitalYEWFLO
AI3 Block OUT
or
AI3 Block
SIMULATE
Output.Value
(Relative Index: 8)
<Effective Mode: Auto>
or
S
imulate.SimulateValue
(Relative Index: 9)
<Effective Mode: Auto/MAN>
Output Scale.Units
Index
(Relative Index: 11)
Temperature
digitalYEWFLO
(In case
Using built-in
temperature
output)
AI2 Block OUT
or
AI2 Block
SIMULATE
Output.Value
(Relative Index: 8)
<Effective Mode: MAN>
or
S
imulate.SimulateValue
(Relative Index: 9)
<Effective Mode: Auto/MAN>
Output Scale.Units
Index
(Relative Index: 11)
Temperature
Transmitter
(In case Using
external
temperature
output)
AI Block OUT
or
AI Block
SIMULATE
Output.Value
(Relative Index: 8)
<Effective Mode: MAN>
or
S
imulate.SimulateValue
(Relative Index: 9)
<Effective Mode: Auto/MAN>
Output Scale.Units
Index
(Relative Index: 11)
Pressure
Pressure
Transmitter
AI Block OUT
or
AI Block
SIMULATE
Output.Value
(Relative Index: 8)
<Effective Mode: MAN>
or
S
imulate.SimulateValue
(Relative Index: 9)
<Effective Mode: Auto/MAN>
Output Scale.Units
Index
(Relative Index: 11)
IMPORTANT
Before write parameter, set the Function Block Mode in AI Block according to Table 8.12