Operation Manual

<8. Operation of DYFMVTool>
8-18
IM 01C25R51-01E
8.2.3 Apply Flow Conguration
Figure 8.18 Apply Flow Conguration Screen
Inordertodownloadthecongurationtothedevice,click“Apply”.
Thenperform“DownloadtoDevice”fromDeviceDTM.(Refertosection6.2.3)
Refer to Chapter 5 and Figure 6.3.
NOTE
Followingshows“DeviceGeneralParameters”whichisappliedto“OfineDatabase”.
Table 8.9 “Device General Parameters” applied to “Ofine Database”
Simple Compensation Mode
Saturated steam
(Temperature)
Saturated steam
(Pressure)
Superheat steam
Gas temperature
pressure
compensation
Liquid temperature
compensation
Arithmetic Type Applied Applied Applied Applied Applied
Bias A
pplied(Always"0") Applied(Always"0") Applied(Always"0") Applied(Always"0") Applied(Always"0")
Gain A
pplied(Always"1") Applied(Always"1") Applied(Always"1") Applied(Always"1") Applied(Always"1")
Bias Input 1 A
pplied(Always"0") Applied(Always"0") Applied(Always"0") Applied(Always"0") Applied(Always"0")
Gain Input 1 A
pplied(Always"1") Applied(Always"1") Applied(Always"1") Applied(Always"1") Applied(Always"1")
Bias Input 2 A
pplied(Always"0") Applied(Always"0") Applied(Always"0") Applied(Always"0") Applied(Always"0")
Gain Input 2 A
pplied(Always"1") Applied(Always"1") Applied(Always"1") Applied(Always"1") Applied(Always"1")
Output Range.Unit Index Applied Applied Applied Applied Applied
V
olumetricFlowUnit Applied Applied Applied Applied Applied
Temperature Unit Applied — Applied Applied Applied
Base Temperature — — — Applied Applied
Pressure Unit — Applied — Applied —
Base Pressure abs — — — Applied —
Density Unit Applied Applied Applied Applied
*1
Applied
Base Density — — — Applied
*1
Applied
Deviation — — — Applied —
First Temperature Coef. — — — — Applied
Second Temperature Coef. — — — — Applied
A
pplied:TargetparameterisappliedbyDYFMVTool
*1: Not applied when output unit is Normal or Standard