Operation Manual

<8. Operation of DYFMVTool>
8-13
IM 01C25R51-01E
8.1.5 Fluid Physical Property Setup
(1) Gas
Figure 8.12 Fluid Physical Property Setup Screen (1)
Conrmthevalueofdensity,viscosity,molecularweightandisentropicexponent.
Units can selectable from following.
Density: kg/m3 (Default), lb/ft3
V
iscosity:Pasec,lb/ftsec
NOTE
Thedensityandviscosityvaluecanbecustomized.
Theisentropicexponentvaluecanbecustomized.
Themolecularweightvaluecanbecustomized.
The value is shown after entering return key.
NOTE
Ifthe“TherangethatspeciedinthestepofFluidOperatingRangeSetupistoonarrow.Expand
the range of pressure or temperature” error message is displayed when the Next button is
c
licked,thetemperatureandpressurerangeinputonthe“FluidOperatingRangeSetup”is
narrow.
Please specify another value (wider range) and try again.
Figure 8.13 Information message for setting range