Operation Manual

<8. Operation of DYFMVTool>
8-12
IM 01C25R51-01E
(2) Liquid
Figure 8.11 Fluid Operating Range Setup screen (3)
Input operating range and select units
Temperature unit is selectable from degC, degF or Kelvin.
Input Base Condition and select units
Temperature unit is selectable from degC, degF or Kelvin.
NOTE
• Pleaseconrmthedensityvalueonthefollowingpage(uidphysicalpropertysetuppage)
andcontinueconguration.
• Ifthetemperaturerangeinputonthe“FluidOperatingRangeSetup”istoowide,thereisa
probability of the calculation error of density is big.
• T
his range are used only for the density and viscosity calculation.
• Range of Flowmeter are not changed.