Operation Manual

<8. Operation of DYFMVTool>
8-6
IM 01C25R51-01E
8.1.3 Natural Gas Setup
(1) AGA8 Detail Characterization Method
Figure 8.4 Natural Gas Setup screen (1)
Input mole component of 21 materials.
Range must be checked as Table 8.3.
Total mole percent must become 100%.
•
 Standardize: Standardizethemolecomponentvalue.
 C
lick[Standardize]buttonwhentotalmolepercentdoesnotbecome100%.
• Reset: Reset the mole component value
• Total mole: Total mole percent is displayed
NOTE
Incasethat“TotalMole”isdisplayedas“100%”,errormessageisdisplayedasfollows.
 “Thetotalmoleshouldexactlybe100%”
Click[Standardize]button.