Operation Manual

<7. Operation of EJXMVTool>

7-23

IM 01C25R51-01E

CAUTION

WhileexecutingObtainFlowCoefcientontheFOUNDATIONeldbusDTM,donotwritethe

parameters of the EJX Multivariable Transmitter from other parameter setting tools.

NOTE

• This menu is active only when the transmitter is connected.

• In Basic mode density output data is always 0.

NOTE

If one of following alarm occurs, all the output data is held to the value before alarm occurs.

AL. 01(CAP.ERR)

AL. 02(AMP.ERR)

AL. 03(ET.ERR)

ordetailalarminformation,refertoUser’sManualIM01C25R03-01E“EJX910AandEJX930A

Fieldbus Comminication Type”.

JXMVToolHelp

Clickthe[Help]→[EJXMVToolHelp]

TheEJXMVToolonlinemanualopenedwhenthismenuisclicked.

EJXMVToolAbout

Clickthe[Help]→[EJXMVToolAbout]

TheEJXMVToolversionnumberisshownwhenthismenuisclicked.