Operation Manual

<7. Operation of EJXMVTool>
7-15
IM 01C25R51-01E
7.1.6 Fluid Physical Property Setup
(1) Gas or Steam
Figure 7.14 Fluid Physical Property Setup Screen (1)
Conrmthevalueofdensity,viscosity,molecularweightandisentropicexponent.
Units can selectable from following.
Density: kg/m3 (Default), lb/ft3
V
iscosity:Pasec,lb/ftsec
NOTE
Thedensityandviscosityvaluecanbecustomized.
TheIsentropicexponentvaluecanbecustomized.
Themolecularweightvaluecanbecustomized.
The value is shown after entering return key.
NOTE
Ifthe“TherangethatspeciedinthestepofFluidOperatingRangeSetupistoonarrow.Expand
the range of pressure or temperature” error message is displayed when the Next button is
clicked, the temperature and pressure range input on the Fluid Operating Range Setup is narrow.
Please specify another value (wider range) and try again.
Figure 7.15 Information message for setting range