Operation Manual

<7. Operation of EJXMVTool>
7-14
IM 01C25R51-01E
(3) Liquid
Figure 7.13 Fluid Operating Range Setup Screen (3)
Input operating range and select units
Temperature unit is selectable from degC, degF or Kelvin.
Input reference condition and select units
Temperature unit is selectable from degC, degF or Kelvin.
NOTE
• Pleaseconrmthedensityvalueonthefollowingpage(uidphysicalpropertysetuppage)
andcontinueconguration.
• If the temperature range input on the Fluid Operating Range Setup is too wide, there is a
probability of the calculation error of density is big.
• This range are used only for the density and viscosity calculation.
• Range of Transmitter are not changed.