Operation Manual

<7. Operation of EJXMVTool>
7-7
IM 01C25R51-01E
7.1.4 Natural Gas Setup
(1) AGA8 Detail Characterization Method
Figure 7.4 Natural Gas Setup Screen (1)
Input the value as mole percent for each component shown in Table 7.6.
TheeachvaluemustbespeciedwithintherangeshowninTable7.6.
Total mole percent must become 100%.
•
 Standardize:Standardizethemolecomponentvalue.
  Click[Standardize]buttonwhentotalmolpercentdoesnotbecome100%.
• Reset: Reset the mole component value
• Total mole: Total mole percent is displayed
NOTE
Incasethat“TotalMole”isdisplayedas“100%”,errormessageisdisplayedasfollows.
 “Thetotalmoleshouldexactlybe100%”
Click[Standardize]button.