Owner manual

<Appendix C Device Replacement Tool>
App.-26
IM 01R01A01-01E 9th Edition : May 31, 2013-00
 Step 1-2 Setting COM port and polling address (Upload – Connect)
Select a COM port of the FieldMate modem and the polling address of the original device
Connect the device to the modem. Select the desired COM port and device address, and then
click the “Next” button.
WhentheUSBFieldMatemodemisconnected,thistoolautomaticallyselectstheCOMportto
whichthemodemisconnected.Pollingaddressisnotrecognizedautomatically.Pleaseconrm
the polling address in advance.
App.C5E.ai
Figure App.-C-5 COM Port and Polling Address Setting Display
 Step 1-3 Upload (Upload – Read)
Upload the parameters of the original device
The vendor’s name and model name of the original device appear.
Checktheidentityoftheconnecteddeviceandthenclickthe“Upload”button.
App.C6E.ai
Figure App.-C-6 Upload Display