Manual

<3 PRM Synchronization Tool start>
3-15
IM 01R01A20-01E 8th Edition : May 31, 2013-00
 Parameter sets
Youcanconguretheparametersetforeachselecteddevice.FieldMatecansupportuptove
parametersetsforeachdevice.Whenthislimitisreached,FieldMatewillautomaticallyoverwrite
theoldestparameterset.
Youcanselectparametersetseitherautomaticallyormanually.IntheSynchronizeactivity,both
PRMandFieldMateparametersetscanbemanuallyselected.IntheRestoreactivity,onlyPRM
parametersetscanbemanuallyselected.
030310E.ai
Figure3-10 AdvancedCongurationsdialogbox–Parametersettab
Toselectparametersets:
1. UnderDataOptions,selectthe[Parameter]checkbox.Acheckmarkappearsandthe
optionsintheParametertabareenabled.
 TheoptionsinthetabsareonlyenabledafteryouselectthecorrespondingDataOptions
checkbox.
2. ClickaDeviceTagtoselectadevice.
3. Chooseaparametersetselectionmode:
• Click[Auto-Selection]andthenselectoneofthedrop-downlistoptions:
Table3-6 Auto-Selection options
Auto- Selection options Denition
Thelatestdated‘Donot
Archive’setandlatestdateset
SelectsthelatestparametersetthathasbeenassignedwiththeDonot
Archivekeyandthelatestdatedsetoption.Ifthelatestparametersethas
beenassignedwiththeDonotArchivekey,onlyoneparametersetwillbe
selected.
Thelatestdated‘Donot
Archive’set
SelectsthelatestparametersetthathasbeenassignedwiththeDonot
Archivekey.
Thelatestdatedset Selectsthelatestparameterset,regardlessoftheassignmentoftheDonot
Archivekey.
• Click[ManualSelection]andthenmanuallyselecttheparametersetstobeincludedin
theactivity.Youcanselectuptoveparametersets.