Manual

<5 LAUNCHING>
5-4
IM 01R01A11-01EN
5.2 Loading Existing Verication Data
NOTE
In terms of keeping the integrity of the data, loaded verication data cannot be copied, nor can it
be saved under a different name. Loaded verication data can only be overwritten by new saved
data, except for “Locked data” which cannot be modied.
1) After the “Splash screen” is closed automatically, Figure 5.1.2 is displayed.
2) Click Load (1)in Figure 5.1.2. Figure 5.2.1 is displayed.
3) Select the preferred data from “Data list (1)” and click “OK (2)in Figure 5.2.1.
1
2
3
F050201.ai
Figure 5.2.1 “Select Verication Data” Dialog
Table 5.2.1 “Select Verication Data” Dialog
Item
No.
Item Name Description
1 Data list
Shows the verication data in the database.
For the meaning of the icon in the “Data Status”, see Chapter 7.
2 OK
Loads the verication data.
To use the verication data in the database, select the preferred one
among “Data list” and clickOK”. Figure 5.2.2 is displayed.
3 Cancel
Creates new verication data and shows Figure 5.1.3. See 5.1.
To create the new verication data, click “Cancel”.
2) After loading, Figure 5.2.2 is displayed automatically. Click OK”. “Main Screen” is dis-
played. See Chapter 6.
F050202.ai
Figure 5.2.2 “Verication Data LoadedDialog