Manual

<4 START-UP FROM FieldMate>
4-2
IM 01R01A11-01EN
4.1 From “Segment Viewer” (AXF is reading in
“online” mode in FieldMate)
NOTE
Set the device address to 0. Verication Tool can be started only when the device address is set
to 0. For details on how to set the device address, refer to 9.2.
From “Segment Viewer”, “Verication Tool” can be started by either method (A) or (B).
(A) By right-clicking
Right-click on the target (AXF) icon displayed at “Segment Viewer”, and select “Verication Tool”.
F040102.ai
Figure 4.1.2 Start-up from “Segment Viewer” by Right-clicking