Owner's manual

<9 DATA FILES AND FORMAT> 9-8
IM 11Y01B02-01E-A 4th Edition September 11, 2012-00
9.2 Downloading (Transferring/Exporting) the Data:
AllthelescanbeeasilytransferredfromtheanalyzertothesuppliedUSBmemorydevice.
Simply insert the memory device and wait for the Data Transfer to complete. Do not remove the device
before the transfer is complete. The analyzer will advise via the user interface when Data Transfer is
complete.Fortotallyblindunits(i.e.nouserinterface)waitfortheindicatingLEDtostopblinking/
ashingforatleast5minutestoensurethetransferiscomplete.
NOTES: Please use the supplied “SanDisk” USB memory device with when
getting data from the analyzer. Each analyzer is supplied with one pre-tested
USB memory devices – please retain them and use with each appropriate
analyzer.
Ifanun-recognizedUSBmemorydeviceisused,thentheMSWindowsXPeoperatingsystemmay
attempt to install new hardware. This will not affect the normal operation of the analyzer however, if you
have a full display interface operational a Windows based pop-up may ask for a system reboot.
DonotattempttopluginanyotherUSBbasedproducts(keyboards,WiFi,etc.)intotheUSBports–
Windowsbasedhardwareconictsmayoccur.
Figure19-USBDataPort