Owner's manual

<7 ROUTINE MAINTENANCE> 7-3
IM 11Y01B02-01E-A 4th Edition September 11, 2012-00
•Carefullyremoveallfourfastenersandlockwashersandthemirrormountingplate
The mirror is not fastened or adhered to the mounting plate so during removal, keep the
mounting plate tilted up-wards to prevent the mirror from falling out of the mounting
plate
•Visuallyinspectthemirrorsurfaceforanysignsofcontamination,dirt,deposits,lms,oils,etc.Ifin
any doubt about the quality of the mirror surface then cleaning is recommended. If obvious severe
damage to the actual mirror surface can been seen then a replacement mirror should be
installed.

