Owner's manual

<6 BASIC OPERATION> 6-20
IM 11Y01B02-01E-A 4th Edition September 11, 2012-00
6.5.2 Using Ultra-VNC Software
StarttheUltra-VNCsoftwarebydouble-clickingonthe“vncviewer.exe”ICON(asshownbelow):

WithintheVNCServereld,enterthecorrectIPaddressfortheanalyzertowhichyouareconnecting
then click on “Connect” button. If a successful connection is established then use the default password
forenteringtheVNCconnectionscreenis1234–seescreenbelowthatshowsanexampleIPaddress
of10.0.200.2(TDLS220analyzerSerialnumber220-XX-1402-XXetc.):
DO NOT attempt to change of the “Quick Options” or any
other settings on this menu!
Iftheanalyzerconnectioncannotbeestablished(seeerrormessagebelow)thencheckthe
externalcomputerIPsettings,connectionwires/Cat5cableandIPaddress.Makesureany
otherLANdevices(andWiFi)aredisabledtopreventconicts.


