Owner's manual

<6 BASIC OPERATION> 6-17
IM 11Y01B02-01E-A 4th Edition September 11, 2012-00
Thereare3waystocontrolthevalves:manualcontrolinsoftware,automaticvalve
change in time sequence and remote override though digital contact. The following
softwaredescriptiondeneshowtocongurethesequencingandtimingofthevalves
whenusedinastreamswitchingconguration:
ADVANCED CONFIGURE MENU
Thesoftwaresetupforthestreamswitchingisconguredin
AdvancedCongure->ValveControl.
STATUS OF VALVES
Thispanelshowsthecurrentstatusofallthreevalves.User
can enter any valve to modify the settings.
Note:onlyonevalvecanbeopenatatimeduringnormal
operation.
VALVE CONTROL MODE
There are three ways to change the valve status: Manual,
automaticTimeSequenceandRemoteOverride.
MANUAL VALVE CONTROL
Bytogglingtheswitchinthispanel,usercanmanuallyturnon/
off the valve.
Note:whenusertogglestheswitchtoonwhilethereisanother
valve was on previously, the valve control will turn the other
valveoff.Onlyonevalvecanbeopenatatime.