User Manual

<9. Parameter Lists>
9-8
IM 01C25T02-01E
Relative
Index
Index Parameter Name Factory Default
Write
Mode
Explanation
102 2102 FLG_TEMP_L_LIM -50 — Used for Heat trace monitoring. Refer to A8.3.6.
103 2103 FLG_TEMP_ALM — Used for Heat trace monitoring. Refer to A8.3.6.
104 2104 TEST_KEY1 — Not used for the transmitter.
105 2105 TEST_KEY2 — Not used for the transmitter.
106 2106 TEST_KEY3 — Not used for the transmitter.
107
to
137
2107
to
2137
TEST_1 to TEST_31 — Not used for the transmitter.
9.3 LCD Transducer Block
Relative
Index
Index Parameter Name Factory Default
Write
Mode
Explanation
0 2500 Block Header TAG: “LTB” Block
Tag =
O/S
Information on this block such as Block Tag, DD Revision,
Execution Time etc.
1 2501 ST_REV — — The revision level of the static data associated with the function
block. The revision value will be incremented each time a static
parameter value in the block is changed.
2 2502 TAG_DESC Null O/S The user description of the intended application of the block
3 2503 STRATEGY 1 O/S The strategy eld can be used to identify grouping of blocks.
This data is not checked or processed by the block.
4 2504 ALERT_KEY 1 O/S The identication number of the plant unit. This information
may be used in the host for sorting alarms, etc.
5 2505 MODE_BLK AUTO O/S The actual, target, permitted, and normal modes of the block.
6 2506 BLOCK_ERR — — This parameter reects the error status associated with
hardware or software components associated with a block. It is
a bit string, so that multiple errors may be shown.
7 2507 UPDATE_EVT — — This alert is generated by any change to the static data.
8 2508 BLOCK_ALM — — The block alarm is used for all conguration, hardware,
connection failure or system problems in the block. The cause
of the alert is entered in the subcode eld. The rst alert to
become active will set the Active status in the Status attribute.
9 2509 TRANSDUCER_
DIRECTORY
— — A directory that species the number and starting indices of the
transducers.
10 2510 TRANSDUCER_TYPE 65535 (other) — Identies transducer.
11 2511 XD_ERROR — — The error code in transducer.
0=No failure
19=Conguration error
12 2512 COLLECTION_
DIRECTORY
— — A directory that species the number, starting indices, and DD
Item Ids of the data collections in each transducer within a
transducer block.
13 2513 DISPLAY_SEL DISPLAY1 ON O/S Selection of display1 to 4 to be shown on LCD
Bit0=1:DISPLAY1 ON
Bit1=1:DISPLAY2 ON
Bit2=1:DISPLAY3 ON
Bit3=1:DISPLAY4 ON
14 2514 INFO_SEL UNIT ON,
PARAMETER ON
O/S Selection of items to be displayed
Bit0=1:TAG ON
Bit1=1:PARAMETER ON
Bit2=1:UNIT ON
Bit3=1:STATUS ON
15 2515 BLOCK_TAG1 AI1 — Block tag which includes a parameter to be displayed on
display1
16
2516 PARAMETER_SEL1 AI OUT O/S Selection of a parameter to be displayed on display1. Select a
parameter from Table 6.1
17 2517 DISPLAY_TAG1 Null O/S Name of block tag to be displayed on display1; up to six
alphanumeric plus a slash [/] and a period [.]
18 2518 UNIT_SEL1 0 (Auto) O/S Selection of unit to be displayed. The unit of the parameter
which is selected at PARAMETER SEL1 will be displayed
when "Auto" is selected; user-specied unit at DISPLAY UNIT1
will be displayed when "Custom" is selected.
19 2519 DISPLAY_UNIT1 Null O/S User specied unit to be displayed on display1, which will be
available when "Custom" is selected at UNIT SEL1.