User Manual

ii
IM 01C25T02-01E
Edition Date Page Revised Item
12th June 2012 2-2 2.1.1 b. • Change the enclosure code of FM Explosionproof to
“NEMA 4X” from “Type 4X”.
2-5,2-6 2.1.2 a.,b. • Change the enclosure code of CSA Certication to “NEMA 4X,
IP66/ IP67”.
2-7 2.1.2 b. • Change the electrical data.
Ci = 3.52 nF ← 1.76 nF
Li = 0μH ← 0mH
2-9 2.1.3(1) b. • Change the option code of ATEX Flameproof to “/KF22” from
“/KF21”.
2-10 2.1.3(1) c. • Change the option code of ATEX Type protection “n” to “/KN26”
from “/KN25”.
2-11 2.1.3(6) • Change the name plate.
4-3 4.3.1 • Add integral indicator display when powering on.
7-2 7.2.3 • Add standard categories for NAMUR NE-107 instrument
diagnostics alarm.
7-4 7.4 • Add write lock function.
10-1,2,3 10.1,2,3 • ”/LC1” code is standardized.
• Change the option code of explosion protected type.
13th June 2013 2-8 to 2-11
9-4
A5-9
2.1.3
9.1
A5.18.1
• Change the option code of ATEX intrinsically safe to /KS26 from
/KS21.
• Replace ATEX type n by ATEX intrinsically safe Ex ic.
• Correct the default values for FD_EXTENDED_MAP_#
parameters.
• Change the condition for Input Failure as value of PID BLOCK_
ERR.