Owner's manual

<5. Parameter Summary>
5-11
IM 01C25R02-01E
Function Label Item Contents Default value Handling *
1
Status Status group 1 Device status information for
hardware
Display the hardware error R
Status group 2 Device status information for
hardware
Display the hardware error R
Status group 3 Device status information for
process
Display the process error
(Out of specication)
R
Status group 4 Device status information for
process
Display the process error
(Out of setting range)
R
Status group 5 Device status information for
process
Display the process error
(Alarm)
R
Status group 6
Device status information for data Display the setting error R
Status group 7
Device status information for data Display the setting error R
Status group 8
Device status information for data Display the setting error and
process error (Alarm)
R
Status group 9
Device status information for data Display the diagnostic alarm R
Status group 10
Device status information for data Display the diagnostic alarm R
Status group 11
HART 7
Device status information for data Display the simulation mode R
Ext dev status
HART 7
Extended Device Status R
Tag Tag Tag number 16 alphanumerics As specied W
Long tag
HART 7
Long tag Max 32 alphanumerics As specied W
Test key Test key Special maintenance parameter M
Total Flow Cvt Val Convert value for total ow base
unit
W
Freq at 100% Digtal otput fequency at 100% W
Pulse rate Pulse rate W
Modify Unit Modify ow base unit M
Set Base Unit Set total ow base unit M
Total Flow Mode Total ow mode Reset, Start, Start Cyclic or
Stop
W
Total Flow Unit Current total ow unit W
Units Density Unit Density unit W
ET Unit External temperature unit W
Flow Unit Flow unit W
Pres Unit Differential pressure unit W
PV Unit PV unit W
SP Unit Static pressure unit W
SV Unit SV unit W
Total Flow Unit Total ow unit W
TV Unit TV unit W
4V Unit
HART 5
4V unit W
QV Unit
HART 7
QV unit W
Write
protection
menu
Enable wrt 10min Write protection release 8 alphanumerics M
New password User set password for write
protection
8 alphanumerics M
Write protect Write protection indicator Yes or No No R
*1: Handling: R-Read only, W-Read & Write, M-Method, G-Applicable for option code DG6
*2: Max three Burst Messages (Burst Message 1, Burst Message 2, Burst Message 3)