Owner's manual

<5. Parameter Summary>
5-10
IM 01C25R02-01E
Function Label Item Contents Default value Handling *
1
Self test Self test Self-diagnostics M
Sensor trim Clear ET trim Reset ET trim to factory setting M
Clear P snsr trim Reset pressure trim to factory
setting
M
Clear SP snsr trim Reset SP trim to factory setting M
ET trim External temperature trim M
Pres trim Pressure trim M
SP trim Static pressure trim M
Trim Date Trim date **/**/** W
Trim Desc Trim description 16 alphanumerics W
Trim Loc Trim location 8 alphanumerics W
Trim Who Trim person 8 alphanumerics W
Simulation/
Flow
Simulation
(Flow) Simulation
Mode
Simulate Flow Mode W
(Flow) Sim Pres Differential pressure value for
simulation
W
(Flow) Sim Pres
Unit
Differential pressure unit for
simulation
W
(Flow) Sim SP Static pressure value for simulation W
(Flow) Sim SP Unit Static pressure unit for simulation W
(Flow) Sim Temp Temperature value for simulation W
(Flow) Sim Temp
Unit
Temperature unit for simulation W
Basic Flow
Calc
Flow Calc Fixed
Calculation xation value of ow W
Flow Calc mode Flow cauculation mode Auto Comp. Mode or Basic
Mode
W
Fluid Type Fluid type W
Ref SP Referrence static pressure W
Ref Temp Referrence temperature W
Temp K1 The rst in temperature correction
coefcient for liquid
W
SP setup A/G Select W
Atm. Pres Value W
SP Damp Damping time constant for SP As specied or - W
SP H/L Select W
SP Min Span Minimum span for static pressure R
SP LRV Lower range value for static
pressure
W
SP LSL Lower sensor limit for static
pressure
R
SP URV Upper range value for static
pressure
W
SP USL Upper sensor limit for static
pressure
R
*1: Handling: R-Read only, W-Read & Write, M-Method, G-Applicable for option code DG6
*2: Max three Burst Messages (Burst Message 1, Burst Message 2, Burst Message 3)