Owner's manual

<3. Parameter Setting>
3-33
IM 01C25R02-01E
Table 3.8 Burst parameters
Command parameter Burst Command
Burst Msg Trigger
Mode
Burst Trigger
Source
Burst Trigger Units
PV
(Either of differential
pressure, static pressure,
external temperature, ow
rate)
Cmd1:PV Continuous --- ---
Window PV Depend on the
assigned variable to
PV
Rising
Falling
On-change
% range/current
(Percent of range, Loop
current)
Cmd2:% range/current Continuous --- ---
Window % range %
Rising
Falling
On-change
Process vars/current
(Loop current, PV, SV, TV,
QV)
Cmd3:Dyn vars/current Continuous --- ---
Window PV Depend on the
assigned variable to
PV
Rising
Falling
On-change
Process vars/% range/
current with status
*1
(Select up to eight variables
from differential pressure,
static pressure, external
temperature, ow rate, total
ow, percent of range, loop
current, PV, SV, TV and
QV)
*2
Cmd9:Device vars w/Status Continuous --- ---
Window Top of Burst
Device Variables
Depends on mapping
Rising
Falling
On-change
Process vars/% range/
current
(Select up to four variables
from differential pressure,
static pressure, external
temperature, ow rate, total
ow, percent of range, loop
current, PV, SV, TV, and
QV)
*2
Cmd33:Device Variables Continuous Top of Burst
Device Variables
Depend on the
assigned variable to
Burst Device Variables
Window
Rising
Falling
On-change
Self diagnosis information Cmd48:Read
Additional Device Status
Continuous --- ---
On-change All status ---
*1 : Output the data with time and status.
*2 : Select at Burst Device Variables