Manual

<10. General Specications>
10-12
IM 01C25R01-01E
Item Description Code
Painting Color change Amplier cover only
P

Amplier cover and terminal cover, Munsell 7.5 R4/14 PR
Coating
change
Anti-corrosion coating
*1
X2
316 SST exterior parts 316 SST name plate, tag plate and zero-adjustment screw
*17
HC
Fluoro-rubber O-ring All O-rings of amplifier housing. Lower limit of ambient temperature: –15°C(5°F) HE
Lightning protector HART protocol type:
Transmitter power supply voltage: 10.5 to 32 V DC
Allowable current: Max. 6000 A (1×40 μs), Repeating 1000 A (1×40 μs) 100 times
Applicable Standards: IEC 61000-4-4, IEC 61000-4-5
F
OUNDATION eldbus protocol type:
Allowable current: Max. 6000 A (1×40 μs), Repeating 1000 A (1×40 μs) 100 times
Applicable Standards: IEC 61000-4-4, IEC 61000-4-5
Modbus protocol type:
Applicable Standards: IEC 61000-4-5
A
Oil-prohibited use
*2
Degrease cleansing treatment K1
Degrease cleansing treatment with uorinated oillled capsule.
Operating temperature –20 to 80°C( –4 to 176°F)
K2
Oil-prohibited use with
dehydrating treatment
*2
Degrease cleansing and dehydrating treatment K5
Degrease cleansing and dehydrating treatment with uorinated oillled capsule.
Operating temperature –20 to 80°C( –4 to 176°F)
K6
Capsule ll uid Fluorinated oil lled in capsule
Operating temperature –20 to 80°C( –4 to 176°F)
K3
Calibration units *
3
P calibration (psi unit)
(See Table for Span and Range
Limits.)
D1
bar calibration (bar unit) D3
M calibration (kgf/cm
2
unit) D4
Gold-plated diaphragm Surface of isolating diaphragm is gold plated, effective for hydrogen permeation. A1
Long vent *
4
Total length: 119 mm (standard: 34 mm); Total length when combining with option code
K1, K2, K5, and K6: 130 mm. Material: 316 SST
U1
Output limits and failure
operation *
5
(for HART protocol type)
Failure alarm down-scale: Output status at CPU failure and hardware error is –2.5%,
3.6 mA DC or less.
C1
NAMUR NE43 Compliant
Output signal limits:
3.8 mA to 20.5 mA
Failure alarm down-scale: Output status at CPU failure
and hardware error is –2.5%, 3.6 mA DC or less.
C2
Failure alarm up-scale: Output status at CPU failure and
hardware error is 110%, 21.6 mA or more.
C3
Body option
*6
F1004.ai
HL
Terminal
Side
Right side high pressure, without drain and vent plugs N1
N1 and Process connection, based on IEC61518 with female thread on both sides of
cover ange, with blind kidney anges on back.
N2
N2, and Material certificate for cover flange, diaphragm, capsule body, and blind
kidney ange
N3
Stainless steel tag plate 304 SST tag plate wired onto transmitter (316 SST when/HC is specied) N4
Data conguration at
factory *
7
Data conguration for HART communication type Software damping,
Descriptor, Message
CA
Data conguration for Fieldbus communication type Software damping CC
Data conguration for Modbus communication type Software damping,
Descriptor, Message
CE
PID function
*15
(For FOUNDATION Fieldbus protocol type)
PID control function
LC1
Advanced diagnostics
(For HART or
F
OUNDATION Fieldbus
protocol type)
Multi-sensing process monitoring
• Impulse line blockage detection
*19
• Heat trace monitoring
HART communication type DG6
Fieldbus communication type
*18
DG1
Software downloading
function
*15
(For FOUNDATION Fieldbus protocol type)
Based on F
OUNDATION Fieldbus Specication (FF-883) Download class: Class1
EE
European Pressure
Equipement Directive
*16
PED 97/23/EC Category III, Module H, type of equipment: Pressure accessory-vessel,
Tupe of uid: Liquid and Gas, Group of uid: 1 and 2
Lower limit of Process and Ambient temperature for EJX910A: –29°C
PE3