Manual

i
IM 01C25R03-01E
Revision Information
 Title : EJX910A and EJX930A
Fieldbus Communication Type
 Manual No. : IM 01C25R03-01E
Edition Date Page Revised Item
1st June 2006 — New publication
2nd Sep. 2006 —
9-14
Correct errors.
Add ‘9.6 Parameter Names Cross Reference.’
3rd Feb. 2008 2-1 through 2-7
2-4 through 2-6
2-6
2-7
10-2
2.1 Add applicable standard and certicate number for each approval.
2.1.3 Add ATEX intrinsically safe type (/KS25).
2.1.3 Revise information for ATEX ameproof type.
2.1.4 Add IECEx Flameproof type (/SF2).
10.3 Add /KS25 and /SF2. Remove /KF2 and add /KF21.
4th Aug. 2008 2-2
2-4
10-2
10-3
2.1.1 Add FM intrinsically safe and Nonincendive type (/FS15).
2.1.2 Revise certicate number of CSA explosion proof type (/CF1).
10.3 Add /FS15.
10.3 Add the description of Process Sealing Certication to /CF1.
5th Mar. 2009
A-69 through A-93
5-8 through 5-11
8-3
8-7
9-6 and 9-7
9-12 through 9-14
Add model EJX930A
APPENDIX8. Add Advanced diagnostic function
5.5 Add advanced diagnostic and LCD transducer block parameters.
8.2 Add status regarding Advanced diagnostic.
8.2 Add alarms regarding Advanced diagnostic.
9.2 Add Advanced diagnostic parameters.
9.4 Add LCD transducer block parameters.
6th Aug. 2009 — Miscellaneous corrections.
7th Apr. 2010
2-1 through 2-9
9-6
10-2 through 10-3
2.1 Add limitation of ambient temperature for /HE.
9.3 Correct the default value for INFO_SEL.
10.3 Add limitation of ambient temperature for /HE.
8th Mar. 2012 2-1
A4-4
2.1 Add note for blind plugs.
A4.3.1 Change the formula of 10).
9th Aug. 2012 2-8
2-9
10-9
2.1.3. (1) b. Revise the contents of ATEX ameproof approval.
2.1.3. (6) Change the picture of nameplate and data plate for ameproof
approval.
10.3 Replace /KF21with /KF22.
10th June 2013 1-1
2-6 to 2-9
2-9
4-1
4-3
6-16
10-2
1 Add coverage of this IM.
2.9.3 Change ATEX intrinsically safe to /KS26 from /KS25.
Add note for CE marking notied body number.
4.1 Add gure 4.2.
4.3 Revise the descriptions about default address.
Add ‘4.5 Setting Parameters with Using DTM.’
6.6.5 Correct errors in Figure 6.6.
6.6.6 Add hysteresis for LOW_CUT.
10.3 Change ATEX intrinsically safe to /KS26 from /KS25.