Instruction Manual

<10. General Specications>
10-10
IM 01C27H01-01E
II. Diaphragm seal section (Combination type)
 Process connection size: High pressure side; 4-inch (100 mm) • • • Extended type
Low pressure side; 3-inch (80 mm) • • • Flush type
T13E.ai
Model
EJX118B
Description
Transmitter body section (I)
Combination type (Extended and Flush)Process connection style
High pressure side 4-inch (100 mm)
Low pressure side 3-inch (80 mm)
JIS S25C
JIS SUS304
JIS SUS316
Serration (for ANSI flange only)
Flat (no serration)
[Diaphragm] [Pipe] [Others]
High pressure side: JIS SUS316L JIS SUS316 JIS SUS316
Low pressure side: JIS SUS316L — JIS SUS316L
None
Length (X
2
) = 50 mm
Length (X
2
) = 100 mm
Length (X
2
) = 150 mm
[Process [Ambient
temperature] temperature]
For general use (silicone oil) –10 to 250°C –10 to 60°C
For general use (silicone oil) –30 to 180°C –15 to 60°C
For high temperature use (silicone oil) 10 to 310°C 10 to 60°C
For oil-prohibited use (fluorinated oil)
*2
–20 to 120°C –10 to 60°C
For low temperature use (ethylene glycol) –50 to 100°C –40 to 60°C
High pressure side: Back of diaphragm seal unit
Low pressure side: Side of diaphragm seal unit
Always 2
/ Optional specification
1 m
2 m
3 m
4 m
5 m
6 m
7 m
8 m
9 m
10 m
Process connection size
(Process flange size)
Flange material
►
Gasket contact surface
*1
Wetted parts material
*4
Flushing connection ring
Extension
Fill fluid
►
Capillary connection
—
Capillary length
*3
Suffix codes
A . . . . . . . . . . . . . . . . .
B . . . . . . . . . . . . . . . . .
C . . . . . . . . . . . . . . . . .
1 . . . . . . . . . . . . . . . .
2 . . . . . . . . . . . . . . . .
0 . . . . . . . . . . . . .
1 . . . . . .
2 . . . . . .
3 . . . . . .
4 . . . . . .
5 . . . . . .
6 . . . . . .
7 . . . . . .
8 . . . . . .
9 . . . . . .
A . . . . . .
-A . . . . . . . . . .
-B . . . . . . . . . .
-C . . . . . . . . . .
-D . . . . . . . . . .
-E . . . . . . . . . .
SY . . . . . . . . . . . . .
W . . . . . . . . . . . . . . . . . .
1 . . . . . . . . . . . .
3 . . . . . . . . . . . .
5 . . . . . . . . . . . .
C . . . . . . . . .
2 . . . . . . . .
-Y . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
Option codes
F10E.EPS
EJX118B Y
W
JIS 10K
JIS 20K
ANSI class 150
ANSI class 300
JPI class 150
JPI class 300
DIN PN10/16
DIN PN25/40
Flange rating
J1 . . . . . . . . . . . . . . . . . . .
J2 . . . . . . . . . . . . . . . . . . .
A1 . . . . . . . . . . . . . . . . . . .
A2 . . . . . . . . . . . . . . . . . . .
P1 . . . . . . . . . . . . . . . . . . .
P2 . . . . . . . . . . . . . . . . . . .
D2 . . . . . . . . . . . . . . . . . . .
D4 . . . . . . . . . . . . . . . . . . .
The “►” marks indicate the most typical selection for each specication. Example: EJX118B-LMSCG-97JDN-YA1WB1SY01-BC25/□
*1: See table 10-3 ‘Gasket contact surface.’
*2: Even in case where ll uid code D (uorinated oil) is selected, if degrease cleansing treatment or both degrease cleansing and
dehydrating treatment for the wetted parts is required, specify option code K1 or K5.
*3: The specied capillary length of high pressure side (extended side) includes the extension length (X2) and the ange thickness (t).
*4: Users must consider the characteristics of selected wetted parts material and the inuence of process uids. The use of
inappropriate materials can result in the leakage of corrosive process uids and cause injury to personnel and/or damage to plant
facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the ll uid
can contaminate the user’s process uids.
Be very careful with highly corrosive process uids such as hydrochloric acid, sulfuric acid, hydrogen sulde, sodium hypochlorite,
and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.