Instruction Manual

<9. Parameter Summary>
9-3
IM 01C27H01-01EN
Object
ID
Attribute
ID
Label Description
Default
value
Handling
1.
UAPMO
block
(continued)
121 Faults Sensor or
actuator Alert
*2
The On/Off or priority for Faults Sensor or actuator
Alert can be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
1. TRUE
2. 15
W
122 Faults Electronics
Alert
*2
The On/Off or priority for Faults Electronics Alert can
be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 1
1. TRUE
2. 15
W
123 Faults process
inuence Alert
*2
The On/Off or priority for Faults process inuence Alert
can be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
Not available for EJX.
1. TRUE
2. 15
W
124 Faults non-
compliance Alert
*2
The On/Off or priority for Faults non-compliance Alert
can be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
Not available for EJX.
1. TRUE
2. 15
W
125 Other faults Alert
*2
The On/Off or priority for Other faults Alert can be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
Not available for EJX.
1. TRUE
2. 15
W
2.
UDO
block
2 DESCRIPTION Indicates the version and model information of the
downloaded data.
--- R
3 STATE Indicates the status of UAP block.
0 Idle
1 Downloading
3 Applying
4 DLComplete
6 DLError
--- R
5 MAX_BLOCK_
SIZE
Maximum block size. This value is smaller than the
maximum data size of APDU.
--- R
14 LAST_BLOCK_
DOWNLOADED
Indicates the last downloaded block number.
0 means that no block has been downloaded.
--- R
16 ERROR_CODE Indicates the error codes for DLError.
0 = noError
1 = Timeout
2 = ClientAbort
64 = Apply failure
--- R
3.
CO
block
1 REVISION Indicates the revision number such as COMM_
ENDPOINT, etc.
--- R
2 COMM_
ENDPOINT
Indicates the Endpoint information. The following
shows the components.
1. Network address of remote endpoint
2. Transport layer port at remote endpoint
3. Object ID at remote endpoint
4. Stale data limit
5. Data publication period
6. Ideal publication phase
7. PublishAutoRetransmit
8. Conguration status
--- W
3 COMM_
CONTRACT
Indicates the Contract information. The following
shows the components.
1. ContractID
2. Contract_Status
3. Actual_Phase
--- R