Manual

<5. Parameter Setting>
5-13
IM 01C25T04-01EN
h. Bar Graph
ON/OFF setting of Bar Graph in upper eld of
integral indicator can be performed by Bar Graph
parameter.
• Procedure to call up the display
DTM, EDD Local Display → Bar Graph →
→ Enable Enable to indicate bar graph
→ Disable Disable to indicate bar graph
i. Display Cycle
Displaying period can be set from Display Cycle
parameter.
• Procedure to call up the display
DTM, EDD Local Display → Display Cycle →
→
Recommend
Display cycle: 2.8 s
Update period of process value is 400 ms
→ 1-10 Display cycle:
400 ms × (Number selected)