User guide

ii
IM 01C25F01-01E
Edition Date Page Revised Item
6th Apr. 2010 2-1 2.3 • Add limitation of ambient temperature for /HE.
2-4 to 2-11 2.9 • Add limitation of ambient temperature for /HE.
9-3 9.1 • Add material for cover O-rings.
9-5 to 9-6 9.3 • Add /HE.
7th May 2010 — Addition of EJX610A and EJX630A
1-1 1. • Add EJX610A and EJX630A.
2-12 2.11 • Add EJX610A and EJX630A.
4-1 4.1 • Add EJX630A. Add note for D capsule.
4-2 4.3 • Add EJX630A.
5-1 5.1.1 • Add EJX630A.
7-4 7.5 • Revise warm up time.
8-1 8.3 • Revise warm up time.
9-1 to 9-3 9.1 • Add specications of EJX610A and EJX630A.
9-4 9.1 • Delete JIS C0920 from Degrees of Protection.
9-6 9.2 • Add codes of EJX610A and EJX630A.
9-7 to 9-8 9.3 • Add option codes of EJX610A and EJX630A.
9-9 9.4 • Add EJX610A and EJX630A.
9-10 • Add EJX610A and EJX630A.
8th Mar. 2012 2-3
9-4
9-5
2.9
9.1
9.2
• Add note for blind plugs.
• Change description for a plate material.
• Add amplier housing code 3.
9th June 2012 —
1-1
2.3 to 2.12
2-7 to 2-10
9.1 to end
2.9
2.9.3
Add EJA-E series.
• Add Note. Add model name of EJA-E series.
• Delete /V1U.
• Delete /KS2, /KF21, and /KU21. Add /KS21, /KF22, and /KU22.
• Add information for EJA510E and EJA530E. Add output signal
code –J.
10th June 2013 — Add note for PROFIBUS PA communication type.
2-3 • Add note for multiple approval type.
2-6, 2-7 2.9.2 • Correct CSA applicable standards.
2-8 to 2-11 2.9.3 • Replace ATEX type n by ATEX Intrinsically safe Ex ic.
• Add note for CE marking notied body number.
2-13 2.11
• Delete information other than EJ50 and EJX60A.
9-5 to 9-7 9.2 • Add PROFIBUS PA communication type.
9-8 9.3 • Replace ATEX type n by ATEX Intrinsically safe Ex ic.
• Add /V1U1.
9-10 9.4 • Update the drawing for process connection codes 8 and 9.
• Add note for shrouding bolt.