User Manual

IM 01C21D01-01E
REVISION RECORD
Title: Model EJA310A, EJA430A and EJA440A Absolute Pressure and Gauge
Pressure Transmitter
Manual No.: IM 01C21D01-01E
Edition Date Page Revised Item
1st June 1997 – New publication
2nd
3rd
Mar. 1998 CONTENTS
1-1
6-1
11-1
11-3
11-7
2-9+
CMPL
Page 3
1
6.1
11.1
11.2
11.3
CMPL 1C21A1-02E 1st 2nd
Page 2
CMPL 1C21D1-01E 1st 2nd
Page 4
CMPL 1C21E1-01E 1st 2nd
Page 2
Page 3
Page 4
Page 5
CMPL 1C21E2-01E 1st 2nd
Page 4
• Add REVISION RECORD.
• Add ‘NOTE’ notice for F
OUNDATION Fieldbus and HART protcol
versions.
• Add Item to the Wiring Precautions.
• Add F
OUNDATION Fieldbus protocol.
• Add output signal code F and wetted parts material code A
and D.
• Add Optional code A1.
• Change the figure of terminal configuration.
• Add Item 7-2.
• Add Optional code K6.
• Add figure of low pressure side cover flange.
• Add Part No. to Item 3, 4, 5, 6, 7, 8, 9, and 13.
• Add Part No. to Item 21.
• Add Item 24 and 25.
• Add Optional code K6.
• Add Wetted parts material code A and D to Table1.
• Delete Optional code K5 and K6.
REVISION RECORD.EPS
Sep. 1998
4th
Oct. 1999
–
2-14
8-15
11-3
11-4
11-5
CMPL
Changed to Electronic File Format.
8.3.2(8)
11.2
CMPL 1C21A1-02E 2nd 3rd
Page 2
CMPL 1C21E1-01E 2nd 3rd
Page 5
CMPL 1C21E2-01E 2nd 3rd
Page 3, 4
• Delete EMC Conformity Standards Tables and remove the page.
• Correction made in BURN OUT figure.
• Add Electrical connection code 7, 8, and 9.
• Add Wetted parts material code M.
• Add Elactrical connection code 7, 8, and 9.
• Add Process connections code 0, 1, and 2.
• Add Electrical connection code 7, 8, and 9.
• Add Part No. to Item 3 (For PG13.5 and M20).
• Add Part No. to Item 10 (For 1/2 NPT, Pg13.5, and M20).
• Add Wetted parts material code M to Table 1.
• Add Part No. to Item 13-2 (For Rc1/4 and Rc1/2).
• Add Part No. to Item 4, 5, 7, 8, and 22 (For Rc1/4).
-
2-8
8-4
10-4
CMPL
Revised a book in a new format.
(The location of contents and the associated page numbers may
not coincide with the one in old editions.)
2.10
8.3.1
10.2
CMPL 1C21A1-02E 3rd 4th
CMPL 1C21D0-01E 1st
• Add AS/NZS 2064 1/2 to EMI, EMC Conformity Standards.
• Move Parameter Summary table to Chapter 8.
• Add Wetted parts material code B.
• Change a format.
• Combine CMPL 1C21D1-01E, 1C21E1-01E, and 1C21E2-01E.
• Change contents of NOTE 1.
• Change contents of NOTE 4.
• Add footnote 2 and 3.
• Add table for tightning torque for cover flange bolts.
• Add calibration units of Pa and hPa.
• Add Bolts and nuts material code C.
• Add Bolts and nuts material code C.
• Add Bolts and nuts material code C and footnote 5.
• Add Amb. Temp. for T6: –40 to 75°C under /KF1.
5th Sep. 2000 2-7 2.9.4b
2-8 2.9.4b
8-5 8.3.1
9-5 9.4.3
10-2 10.1
10-3 10.2
10-4
10-5
10-6 10.3