User Manual

IM 01C22T02-01E
A-6
APPENDIX 1. LIST OF PARAMETERS FOR EACH BLOCK OF THE EJA
26 2026 –SENSOR_CAL_
WHO
Set/indicate the name of the person responsible for the
last sensor calibration.
O/S
27 2027 –SECONDARY_
VALUE
The secondary value (istatic pressure) of transducer.–
28 2028 MPaSECONDARY_
VALUE_UNIT
The engineering unit of secondary value.–
29 2029 –TERTIARY_
VALUE
The tertiary value (Temperature) of transducer.–
30 2030 CTERTIARY_
VALUE_UNIT
The engineering unit of tertiary value.O/S
31 2031
Trim disable
TRIM_PV_ZERO
Trim disable: Prohibit zero/span calibration
Trim enable: Enable zero/span calibration
Trim data clear: Clear zero/span calibration
O/S
32 2032
0
TRIM_MODE
The trim zero of primary value.
O/S
33 2033 EnableEXT_ZERO_
ENABLE
The permission of external SW for trim zero.O/S
34 2034 Model codeMODEL
The model code.–
35 2035 Specified at the time
of order
DISPLAY_MODE
The mode of display. 1=Engineering unit, 2=% display,
3=1/10@Engr. Unit, 4=1/100@Engr. Unit, 5=1/1000@Engr.
Unit, 6=1/10000@Engr. Unit, 7=1/1000000@Engr. Unit.
O/S
36 2036 1DISPLAY_CYCLE
The cycle of display on LCD.O/S
37 2037 DisableALARM_SUM
The current alert status, unacknowledged status,
unreported status and disabled status of the alarms
associated with the function block.
–
38 2038 –TEST_1
Not used for EJA.–
39 2039 –TEST_2
Not used for EJA.–
40 2040 –TEST_3
Not used for EJA.–
41 2041 –TEST_4
Not used for EJA.–
42 2042 –TEST_5
Not used for EJA.–
43 2043 –TEST_6
Not used for EJA.–
44 2044 –TEST_7
Not used for EJA.–
45 2045 –TEST_8
Not used for EJA.–
46 2046 –TEST_9
Not used for EJA.–
47 2047 –TEST_10
Not used for EJA.–
48 2048 –TEST_11
Not used for EJA.–
49 2049 –TEST_12
Not used for EJA.–
50 2050 –TEST_13
Not used for EJA.–
51 2051 –TEST_14
Not used for EJA.–
52 2052 –TEST_15
Not used for EJA.–
53 2053 –TEST_16
Not used for EJA.–
54 2054 –TEST_17
Not used for EJA.–
TA0103-2.EPS
O/S
25 2025 SENSOR_CAL_
DATE
–
Set/indicate the date of the last sensor calibration.
O/S
24 2024 SENSOR_CAL_
LOC
–
Set/indicate the location of the last sensor calibration.
23 2023 103: factory trim
standard calibration
SENSOR_CAL_
METHOD
The method of the last sensor calibration.
100=volumetric
101=static weight
102=dynamic weight
103=factory trim standard calibration
104=user trim standard calibration
105=factory trim special calibration
106=user trim special calibration
255=others
O/S
22 2022 Serial No.SENSOR_SN
Serial number.–
Relative
Index
Index ExplanationWrite ModeFactory DefaultParameter Name