User Manual

ManualsBrandsYokogawa ManualsSensorsEJA115

IM 01C22T02-01E

A-5

APPENDIX 1. LIST OF PARAMETERS FOR EACH BLOCK OF THE EJA

A1.3 Transducer Block

Relative

Index

Index ExplanationWrite ModeFactory DefaultParameter Name

0 2000 TAG: “TB”Block Header

Information on this block such as Block Tag, DD

Revision, Execution Time etc.

Block Tag

= O/S

1 2001 –ST_REV

The revision level of the static data associated with the

function block. The revision value will be incremented

each time a static parameter value in the block is

changed.

–

2 2002 (blank)TAG_DESC

The user description of the intended application of the

block

AUTO

3 2003 1STRATEGY

The strategy field can be used to identify grouping of

blocks. This data is not checked or processed by the

block.

AUTO

4 2004 1ALERT_KEY

The identification number of the plant unit. This

information may be used in the host for sorting alarms,

etc.

AUTO

5 2005 AUTOMODE_BLK

The actual, target, permitted, and normal modes of the

block.

AUTO

6 2006 –BLOCK_ERR

This parameter reflects the error status associated with

hardware or software components associated with a

block. It is a bit string, so that multiple errors may be

shown.

–

7 2007 –UPDATE_EVT

This alert is generated by any change to the static data.–

8 2008 –BLOCK_ALM

The block alarm is used for all configuration, hardware,

connection failure or system problems in the block. The

cause of the alert is entered in the subcode field. The

first alert to become active will set the Active status in

the Status attribute.

–

9 2009 –TRANSDUCER_