Manual

<8. Parameter Summary>
29
IM 01C22A01-01E
8. Parameter Summary
NOTE
For FOUNDATION Fieldbus and PROFIBUS PA
communication types, please refer to manuals in the
attached CD-ROM.
IMPORTANT
If the transmitter is turned off within 30 seconds after
parameters have been set, the set data will not be
stored and the terminal returns to previous settings.
 HART Communication Menu Tree
1 DEVICE SETUP
2 Pres
3 A01 Out
4 LRV
5 URV
Online Menu
1 PROCESS
VARIABLES
2 DIAGNOSTICS
AND SERVICE
3 BASIC SETUP
4 DETAILED
SETUP
5 REVIEW
1 Pressure
2 Percent Range
3 Analog Output
4 Sensor Temperature
5 Static Pressure
6 Engineering Unit
7 Engineering Display
1 TEST/STATUS
2 Loop Test
3 CALIBRATION
1 Self Test
2 Status
1 Keypad Input
2 Wrt protect menu
Hot Key 1 LRV
2 URV
3 Unit
4 LSL
5 USL
6 Min Span
1 Tag
2 Unit
3 RERANGE
4 DEVICE INFO
5 Transfer Function
6 Damp
7 Low Cut
8 Cut Mode
1 Keypad Input
2 Apply Values
1 Date
2 Descriptor
3 Message
4 Write Protect
1 SENSORS
2 SIGNAL
CONDITION
3 OUTPUT
CONDITION
4 DISPLAY
CONDITION
5 DEVICE
INFORMATION
1 Pressure Sensor
2 Temperature
Sensor
3 Static Pressure
Sensor
1 Percent Range
2 Pressure
3 Unit
4 Sensor Trim
1 Zero Trim
2 Pressure
3 Lower Sensor Trim
4 Upper Sensor Trim
5 Sensor Trim Point
6 Clear snsr trim
1 Snsr temp
2 Amp temp
3 Sensor temp Unit
1 Static Pressure
2 Static Pressure Unit
1 PROCESS
VARIABLES
2 RERANGE
3 Unit
4 Transfer Function
5 Damp
6 Low Cut
7 Cut Mode
8 Bi-dir Mode
9 H2O Unit Select
1 PROCESS
VARIABLES
2 ANALOG
OUTPUT
3 Analog Output
Alarm
4 HART OUTPUT
1 Display Mode
2 Display Function
3 Engineering
Display Range
1 Field Device Info
2 Sensor Info
3 Self Test
1 Engineering Unit
2 Engineering Display LRV
3 Engineering Display URV
4 Engineering Display Point
1 Pressure
2 Percent Range
3 Analog Output
4 Sensor Temperature
5 Static Pressure
6 Engineering Unit
7 Engineering Display
1 Loop Test
2 Digital-to-Analog Trim
3 Scaled D/A Trim
4 Auto recover
5 AO lower limit %
6 AO upper limit %
1 Poll Address
2 Number of Request Preambles
3 Burst Mode
4 Burst Option
1 Pressure
2 Percent Range
3 Sensor Temperature
1 Keypad Input
2 Apply Values
1 RERANGE
2 TRIM ANALOG
OUTPUT
3 SENSOR TRIM
1 Keypad Input
2 Apply Values
1 Digital-to-Analog Trim
2 Scaled Digital-to-Analog Trim
1 Zero Trim
2 Pressure
3 Lower Sensor Trim
4 Upper Sensor Trim
5 Sensor Trim Points
6 Clear snsr trim
F0801.ai
1 Write protect
2 Enable wrt 10 min
3 New password
4 Software seal
Errors and Countermeasures
7
Parameter Summary
8