Owner's manual

<9. General Specications>
9-18
IM 01C25B01-01E
Table. 1 Wetted Parts Materials for EJ

110

, EJ

120

, EJ

310

, and EJ

430

Wetted parts
material code
Cover ange and
process connector
Capsule Capsule gasket Drain/Vent plug
S
#
ASTM CF-8M
Hastelloy C-276 (Diaphragm)
F316L SST*
1
(Others)
Teon-coated 316L SST
PTFE for EJX120A
316 SST
H ASTM CF-8M Hastelloy C-276 PTFE (Teon) 316 SST
M ASTM CF-8M Monel PTFE (Teon) 316 SST
T ASTM CF-8M Tantalum PTFE (Teon) 316 SST
A Hastelloy C-276 equivalent Hastelloy C-276 PTFE (Teon) Hastelloy C-276
D Hastelloy C-276 equivalent Tantalum PTFE (Teon) Hastelloy C-276
B Monel equivalent Monel PTFE (Teon) Monel
*1: 316L SST, F316 SST for EJX120A and EJX110A with measurement span code F.
The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of 316 SST
material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.
Table. 2 Wetted Parts Materials for EJ

130

Wetted parts
material code
Cover
ange
process connector Capsule Capsule gasket Drain/Vent plug
S
#
F316 SST ASTM CF-8M *
1
Hastelloy C-276*
2
(Diaphragm)
F316L SST, 316L SST (Others)
Teon-coated
316L SST
316 SST
*1: Cast version of 316 SST. Equivalent to SCS14A.
*2: Hastelloy C-276 or ASTM N10276.
The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of
316 SST material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.
Table. 3 Wetted Parts Materials for EJ440
Wetted parts
material code
Cover
ange
process connector Capsule Capsule gasket
Drain/
Vent plug
S
#
F316 SST
ASTM CF-8M *
1
(C-capsule)
F316L SST (D-capsule)
Hastelloy C-276 *
2
(Diaphragm)
F316L SST (Others)
Teon-coated
316L SST
316 SST
*1: Cast version of 316 SST. Equivalent to SCS14A.
*2: Hastelloy C-276 or ASTM N10276.
The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of
316 SST material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.