Operation Manual

<6. PARAMETERS>
6-7
IM 01F06A00-01EN
(6) Item F: Thermometer (Only for Multi-Variable Type)
These items is for thermometer setting when.
A Value in “( )” is the data corresponding to the indicator.
Item Name R / W Data Range Unit
Decimal
Point
Remark
Initial
Value
Disp. U / D
(*1)
F00 THERMOMETER Menu F (Thermometer function)
F10 Function W Monitor only (0)
Saturated Steam (1)
Superheat Steam (2)
GAS: STD/Normal (3)
LIQUID: Mass (4)
Not use (5)
Select thermometer function.
(Move to F40 when “Monitor only” is
selected)
(Move to F60 when “Not Use” is
selected)
(0) D L
(Indicate and Set only for F10: Saturated Steam)
F12 MASS UNIT W kg (0)
t (1)
Ib (2)
k Ib (3)
Selection of mass fl ow rate unit (0) D L
(Indicate and Set only for F10: Superheat Steam)
F14 PRSS UNIT W MPa abs (0)
kPa abs (1)
bar abs (2)
kg/cm
2
a (3)
psia (4)
Selection of pressure unit (0) D L
F15 PRESS f W 0.00001 to 32000 F14 0 to 5 Absolute pressure at operating
condition(Manual setting vaiue)
0.1013
F16 MASS UNIT W kg (0)
t (1)
Ib (2)
k Ib (3)
Selection of mass fl ow rate unit (0) D L
(Indicate and Set only for F10: GAS: STD/Normal)
F18 TEMP UNIT W deg C (0)
deg F (1)
Selection of temperature unit (0) D L
F19 TEMP b W -999.9 to 999.9 F18 1 Standard/Normal temperature 15.0 D L
F20 PRESS UNIT W MPa abs (0)
kPa abs (1)
bar abs (2)
kg/cm
2
a (3)
psia (4)
Selection of temperture unit (0) D L
F21 PRESS f W 0.00001 to 32000 F20 0 to 5 Absolute pressure at operating
condition(Manual setting value)
0.1013 D L
F22 PRESS b W 0.00001 to 32000 F20 0 to 5 Absolute pressure at Standard
condition
0.1013 D L
F23 DEVIATION W 0.001 to 10.000 3 Deviation factor 1.0 D L
F24 STD/NOR UNIT W Nm
3
(0)
k Nm
3
(1)
M Nm
3
(2)
NI (3)
Sm
3
(4)
k Sm
3
(5)
M Sm
3
(6)
SI (7)
scf (8)
k scf (9)
M scf (10)
Selection of volumetric unit at normal
condition
N: Normal
S: Standard
(0) D L
(Indicate and Set only for F10: LIQUID: Mass)
F26 DENSITY UNIT W kg/m
3
(0)
Ib/cf (1)
Ib/USgal (2)
Ib/UKgal (3)
Selection of density unit (0) D L
F27 DENSITY b W 0.00001 to 32000 F26 0 to 5 Density of standard condition 1.0 D L
F28 TEMP UNIT W deg C (0)
deg F (1)
Selection of temperature unit (0) D L