Operation Manual

<5. BASIC OPERATING PROCEDURES>
5-1
IM 01F06A00-01EN
5. BASIC OPERATING PROCEDURES
Data setting can be performed with the three keys
on the front panel (SET,SHIFT and INC) or using a
handheld BRAIN TERMINAL (BT200) and HART
communicator.
5.1 Display Confi guration
Figure 5.1 shows the confi guration of the
digitalYEWFLO display panel (if equipped).
SET
INCSHIFT
F0501.ai
Data Display
(Upper)
1
Unit Display
4
Unit Display
4
Setting Keys
5
Alarm Display
3
Data Display
(Lower)
2
Figure 5.1 Display Confi guration
1
Data Display(Upper) : fl owrate data, setting data,
total data
temperature data (/MV)
2
Data Display(Lower) : total data, alarm data
temperature data (/MV)
3
Alarm Display : alarm of a fl ow error and a
vibration error
4
Unit Display : fl owrate unit
5
Setting Keys : These keys are used to
change fl ow rate data
displays and type of
setting data