Operation Manual

i
IM 01F06A00-01EN
Revision Information
 Title: Model DY Vortex Flowmeter
Model DYA Vortex Flow Converter
 Manual No.: IM 01F06A00-01EN
Edition Data Page Revised Item
3rd Jun. 2002 1-1
2-2
2-3
2-5
2-6, 2-7
2-9
2-10
4-2
6-1
6-6
6-10
7-3
9-1
9-3
9-4
9-5
9-6
9-8
9-10
9-11
10-1
1.1 Change Figure1.1(b).
2.2 Change the process temperature range and ambient temperature.
2.2 Add Pressure Equipment Directive, Change Figure 2.2.1.
2.3 Change Table 2.3.1 “Body” of Cryogenic Version.
2.4 Change the process temperature range and ambient temperature.
2.4 Change the process temperature range.
2.4 Change Figure 2.4.1 , 2.4.2.
4.2 Add the description of Table 4.1.
6.3 Change the contents of parameter lists.
6.3 Change a table of parameter list.
6.4 Add the description of “B50 A/OUT SELECT”.
7.2.2 Change a tuning method.
9.1.1 Change the process temperature and ambient temperature.
9.1.6 Change Data Plate.
9.2.1 Change the process temperature and ambient temperature.
9.2.5 Correct “WARNING” and Installation Diagram of Non incendive.
9.2.6 Change Data Plate.
9.4.1 Change the process temperature and ambient temperature.
9.4.5 Correct the Installation Diagram of Non incendive.
9.4.6 Change Data Plate.
10 Change the technical data.
4th Sep. 2003 2-4
2-5
2-8, 2-9
2-11
3-10
4-1
4-3
5-9
2.3 Add BS1 to 5.
Table 2.3.2 Add BS1 to 5.
2.4 Add Hydrostatic Pressure Test, etc.
2.5 Table 2.5.1 Change the value for size 40 mm.
3.7.3 Add the description.
4.2 Figure 4.2 Add the description.
4.4 Figure 4.5 Add the description.
5.5 Figure 5.5 Add the description.
5th Apr. 2004 i
iv
vi
1-1
2-1/22
3-1/10
3-9
3-10
4-1/6
4-4/5
5-1/24
6-1/17
7-1/4
9-1/11
10-1
8-5/6
8-7/8
CONTENTS Reconfi guration.
Add symbol mark, revision.
Revision.
Revision.
Revision of Specifi cation, Move to Chapter 9.
Revision, Move to Chapter 2.
Revision, Move to Chapter 7.
Add IMPORTANT, Revision, Move to Chapter 7.
Move to Chapter 3.
Revision, Move to Chapter 3.
Revision, Move to Chapter 4.
Revision, Move to Chapter 5.
Change Chapter name MAINTENANCE to OPERATION.
Revision, Move to Chapter 10.
Move to Chapter 11.
8.3 moves to Chapter 7.
8.4 moves to Chapter 7.
6th Jan. 2005 5-6
5-8
5-16
9-5
9-8
9-13
9-18/25
10-7
10-8
10-9
Correction.
Added a parameter.
Added a parameter explanation and corrections.
Revision (MS code).
Revision (Option Specifi cation).
Revision.
Revision.
Revision.
Revision.
Revision.
7th July 2005 2-5
7-8
9-3
9-6
10-1/13
Added a “CAUTION” about heat insulating material installation.
Revised the formura 7.14.3.
Changed the EMC Conformity Standards No..
Deleted DIN64 and DIN100 (Suffi x Code: BD5 and BD6).
Added Applicable Standard No.and Certifi cate No. to each Approval body.