Operation Manual

<13. GENERAL SPECIFICATIONS>
13-38
IM 01F06A00-01EN
 Stainless Steel Housing Reduced Bore Type (/R1/E1): DY200/R1/E1
 Flange type
ELECTRICAL CONNECTION
EARTH TERMINAL
øD
L
75.5 (2.97)
91 (3.58)
H1
H
20 (0.78)
5
(0.19)
32.5
(1.28)
N - øG
ø
C
14.5 (0.57)
ø
J
ø78 (3.07)
T
58 (2.28)
ø
CS
TYPE REMOTE
MODEL CODE DY200/R1/E1
PROCESS
CONNECTION BJ1 BJ2
BA1
BS1
BA2
BS2
L 310 (12.20)
C 185.6 (7.31)
CS 138.8 (5.46)
D 330 (12.99) 350 (13.78) 342.9 (13.50) 381 (15.00)
H
Shedder Bar Material: L, E, X 465 (18.31) 475 (18.70) 471.5 (18.56) 490.5 (19.31)
Shedder Bar Material: B 472 (18.58) 482 (18.98) 478.5 (18.84) 497.5 (19.59)
H1
Shedder Bar Material: L, E, X 209 (8.23)
Shedder Bar Material: B 216 (8.50)
T 22 (0.87) 30 (1.18) 28.4 (1.12) 41.1 (1.62)
J 290 (11.42) 305 (12.01) 298.5 (11.75) 330.2 (13.00)
N 12 12 8 12
G 23 (0.91) 25 (0.98) 22.4 (0.88) 25.4 (1.00)
WEIGHT kg (lb) 58.8 (129.6) 74.2 (163.6) 70.8 (156.1) 103 (227.1)
(Note 1) The fl ow direction is opposite (right to left when facing onto indicator) in case of code/CRC.
Unit : mm
(approx. inch)