User guide

7-11
IM DR231-11E
Output Format
7
7.10 RAM Disk Output Format (ASCII Code)
The following formats are output by the TS3 + [GET] + MF1 command.
Header AAAAAA-BBBBBB, CCCCCC,DDD-EEECH, FFFFFGGGCrLf
YY-MM-DD hh:mm:ssCrLf
First Data Number *SNNNNNCrLf
Date and Time YY-MM-DD hh:mm:ssCrLf
First Data S1S2UUUUUUCCC,
±DDDDDE-EpCrLf
---------------------
Last Data Number *SNNNNNCrLf
Date and Time YY-MM-DD hh:mm:ssCrLf
Last Data S1S2UUUUUUCCC,
±DDDDDE-EpCrLf
Each symbol denotes the following:
Header
AAAAAA: First output data (six characters)
BBBBBB: Last output data (six characters)
CCCCCC: Data number of trigger position (six characters)
DDD: First output channel (three characters)
Channel for computation
A01 to A30 (stand-alone model)
A01 to A60 (expandable model)
EEE: Last output channel (three characters)
Channel for computation
A01 to A30 (stand-alone model)
A01 to A60 (expandable model)
FFFFF: Data save interval (five characters)
GGG: Unit of data save interval (three characters)
YY-MM-DD hh:mm:ss
Year-Month-Day Hour:Minute:Second
Data number
*: Indicates information for data numbers.
S: Trigger information
Space ------------------- other than a trigger point
T ------------------------- trigger point
NNNNN: Data number (five characters)
Date and Time
Date and time when the data are saved.
The time is in 0.5-second units depending on the measurement interval used.
Data
S1: Data status 1
N ------------------------ normal
O ------------------------ over (data of ±99999)
S ------------------------- skip (data of all space)
E ------------------------- abnormal
S2: Data status 2
Space ------------------- interim data
E ------------------------- last data
UUUUUU: Units (six characters)
mV [ ] [ ] [ ] [ ] -------- mV
V [ ] [ ] [ ] [ ] [ ] ------- V
[ ] C [ ] [ ] [ ] [ ] ------- °C
UUUUUU-------------- arbitrary